3DCover difficulties, please help!

A plethora of command-line scripts that perform geometric transforms, blurs, sharpens, edging, noise removal, and color manipulations.
Post Reply
iampercival88
Posts: 6
Joined: 2017-03-21T16:53:10-07:00
Authentication code: 1151

3DCover difficulties, please help!

Post by iampercival88 »

Hi I am trying to recreate this 3D cover, with very similar arguments: http://prntscr.com/ems2f3

The arguments I am using are: -s "10%" -a 25 -o 20 -m backdrop -u 50 -p 10 -l 15

but for some reason the resulting image comes out looking like this, with no 3d perspective at the spine: http://prntscr.com/emw1wu

not too sure what I could be doing wrong, any assistance would be greatly appreciated, let me know if there is any other info I can provide to help clarify the issue or aide to a solution. :D

Using IM version 7.0.5-3, using both 3DCover and 3DRotate scripts
User avatar
fmw42
Posts: 25562
Joined: 2007-07-02T17:14:51-07:00
Authentication code: 1152
Location: Sunnyvale, California, USA

Re: 3DCover difficulties, please help!

Post by fmw42 »

It seems to be failing in 3Drotate for IM 7. I will take a look into this.
User avatar
fmw42
Posts: 25562
Joined: 2007-07-02T17:14:51-07:00
Authentication code: 1152
Location: Sunnyvale, California, USA

Re: 3DCover difficulties, please help!

Post by fmw42 »

OK. I think I have it fixed. Try downloading 3Drotate again from my web site. Let me know if it works or not.
iampercival88
Posts: 6
Joined: 2017-03-21T16:53:10-07:00
Authentication code: 1151

Re: 3DCover difficulties, please help!

Post by iampercival88 »

Hi Fred, thank you for the quick response! Unfortunately after re-downloading and updating our 3DRotate script we still get the same issue of no 3d perspective at spine: http://prntscr.com/eod3kl (hard to see in pic but its on left side of image).. hmm... :/
User avatar
fmw42
Posts: 25562
Joined: 2007-07-02T17:14:51-07:00
Authentication code: 1152
Location: Sunnyvale, California, USA

Re: 3DCover difficulties, please help!

Post by fmw42 »

iampercival88 wrote: 2017-03-25T10:45:35-07:00 Hi Fred, thank you for the quick response! Unfortunately after re-downloading and updating our 3DRotate script we still get the same issue of no 3d perspective at spine: http://prntscr.com/eod3kl (hard to see in pic but its on left side of image).. hmm... :/
Odd! It works fine for me. But I run IM 7 rather differently since it is not my default version of IM.

This works for me using my example image:

Code: Select all

im7 3Dcover -s "10%" -a 25 -o 20 -m backdrop -u 50 -p 10 -l 15 wedding.jpg test.png
Nevertheless, do you get any error messages? Are you running it in a terminal window or via PHP exec() or some other way?

Can you run IM 7 using convert rather than magick? E.G. do both of these work?

Code: Select all

magick logo: logo.png
convert logo: logo.png
What is your platform? Is there a symbolic link set up from convert to magick?

Does the top of the script (opened in a text editor) say "revised 3/21/2017"
User avatar
fmw42
Posts: 25562
Joined: 2007-07-02T17:14:51-07:00
Authentication code: 1152
Location: Sunnyvale, California, USA

Re: 3DCover difficulties, please help!

Post by fmw42 »

See above. Also perhaps your 3Dcover cannot find 3Drotate. Do you have all my scripts in a common directory and is that directory in your PATH environment variable? If not, then edit 3Dcover to put the full path to 3Drotate in 2 places at about lines 772 and 776. Does it work now?
iampercival88
Posts: 6
Joined: 2017-03-21T16:53:10-07:00
Authentication code: 1151

Re: 3DCover difficulties, please help!

Post by iampercival88 »

Hello there Fred, I asked my backend developer your above questions, here are his answers after he made your suggested changes:
For your reference, here is a sample output image after most recent changes were attempted: http://prntscr.com/euiew5

"no error message and the image was tilted but i dont know why it doesnt have correct perspective at spine..

I am using NodeJS and not PHP exec, but the method is similar in different technology

Both Convert and Magick tools are working

Platform is CentOS 7
No, Symbolic link is not setup, they both came as separate binaries

the 3drotate script is the most current version updated in 2017

The changes asked for line number 772 and 776 were also made."

using these parameters: " -s "10%" -a 25 -o 20 -m backdrop -u 50 -p 10 -l 15 input output

We will keep playing with it to see if we can get it to work, but any other suggestions would be greatly appreciated, thank you sir! :)
User avatar
fmw42
Posts: 25562
Joined: 2007-07-02T17:14:51-07:00
Authentication code: 1152
Location: Sunnyvale, California, USA

Re: 3DCover difficulties, please help!

Post by fmw42 »

I believe the problem is that you are using IM 7 and my script is designed for IM 6 and also needs to have my script 3Drotate available. I do not think you are properly accessing 3D rotate.

So you will need to modify lines 772 and 776 so that the path to where you have 3Drotate is specified. That is replace 3Drotate with path2/3Drotate, where path2 is the path where you have put 3Drotate.

Do both of these commands work?

Code: Select all

magick logo: logo.png
convert logo: logo.png
If not, then try changing every occurrence of convert to magick in both 3Dcover and 3Drotate. Does that work?
" -s "10%" -a 25 -o 20 -m backdrop -u 50 -p 10 -l 15 input output
Why is there a " before -s?

Does it work with my image from my web site?

Code: Select all

3Dcover -s "10%" -a 25 -o 20 -m backdrop -u 50 -p 10 -l 15 wedding.jpg test.png
If not, try one of my examples at http://www.fmwconcepts.com/imagemagick/ ... /index.php. For example:

Code: Select all

3Drotate pan=45 tilt=45 auto=zc mandril.jpg test.jpg
You may email me directly ( fmw at alink dot net ). That way we can get to the bottom of the issue as I can then send you test versions of the script to find out where there are issues.

Sorry I know nothing about NodeJS
mohit
Posts: 3
Joined: 2017-04-09T07:37:12-07:00
Authentication code: 1151

Re: 3DCover difficulties, please help!

Post by mohit »

Hi Fred,
Yes we are using IM 7.
But We are able to access the 3Drotate properly as I have verified that again, I saw error when I was not accessing it but after editing line 772 and 776 as you mentioned, I am able to access 3Drotate properly.
Also the 3Drotate script is latest as you have mentioned.

" was just copied accidently.
I am trying other suggestion with link you just provided.
mohit
Posts: 3
Joined: 2017-04-09T07:37:12-07:00
Authentication code: 1151

Re: 3DCover difficulties, please help!

Post by mohit »

Also Fred, I am able to run the 3drotate correctly and there is no error from 3Dcover either, but I am not getting what we need,

Also your doubt regarding PHP vs Node, both are doing exactly same task here in our scenario, so there is no difference, both have same capabilities here.
mohit
Posts: 3
Joined: 2017-04-09T07:37:12-07:00
Authentication code: 1151

Re: 3DCover difficulties, please help!

Post by mohit »

Hey Fred, I analyzed the following:

I downloaded the wedding.jpg from the official site as directed by Fred,
http://backend.openmypic.com/modules/us ... edding.jpg

Then I tried few samples from the site , even those samples are not showing up as it is expected on the site,
there is something buggy with the script
http://backend.openmypic.com/modules/us ... /test4.png
iampercival88
Posts: 6
Joined: 2017-03-21T16:53:10-07:00
Authentication code: 1151

Re: 3DCover difficulties, please help!

Post by iampercival88 »

Hi Fred, yes we have tried all your suggestions to the best of our knowledge and ability. Any continued support or suggestions from you would be greatly appreciated, as this project is very important to us.
Thank you sir!
User avatar
fmw42
Posts: 25562
Joined: 2007-07-02T17:14:51-07:00
Authentication code: 1152
Location: Sunnyvale, California, USA

Re: 3DCover difficulties, please help!

Post by fmw42 »

iampercival88 wrote: 2017-04-24T17:10:45-07:00 Hi Fred, yes we have tried all your suggestions to the best of our knowledge and ability. Any continued support or suggestions from you would be greatly appreciated, as this project is very important to us.
Thank you sir!
I just sent earlier today an email reply to Mohit. If you are not working together, then send me email (fmw at alink dot net) and I will work with you directly to help resolve this issue.
User avatar
fmw42
Posts: 25562
Joined: 2007-07-02T17:14:51-07:00
Authentication code: 1152
Location: Sunnyvale, California, USA

Re: 3DCover difficulties, please help!

Post by fmw42 »

I now have a version of 3Dcover that works on CentOS, IM 7.0.5.5.
Post Reply